Firefox For Fast and Secure Web Browsing SiliconBunny recommends you
Top Left Corner   Top Right Corner
SiliconBunny Logo

* News
* Newsgroups
* FAQs
* 1600SW FAQs
* Periodic Tables
* Model Summaries
* Software
* Downloads
* OS links
* Security/Patches
* Other Sites
* Local Mirrors
* Books
* Vendors
* Hacks
* CXFS
* Other Stuff
* Management Speak
* Search
 
SiliconBunny News

SGI Indy

Picture of Indy

Until the introduction of the O2, the Indy was SGI's entry level workstation. It has an impressive range of features and ports, and remains a versatile machine.

CPU options
CPU typeSpeed (mhz)Secondary cache size
R4000PC100-
R4000SC1001MB
R4600PC100-
R4600PC133-
R4600SC1330.5MB
R4400SC1001MB
R4400SC1501MB
R4400SC1751MB
R4400SC2001MB
R5000PC150-
R5000SC1500.5MB
R5000SC1800.5MB

PC on a CPU module means Primary Cache (ie. only on-die cache). SC means Secondary Cache (ie. L2 cache on the module).

RAM:

The Indy has 8 slots, taking 72pin parity RAM. 4 SIMMS per bank, 2 banks total, giving a maximum of 265mb.
Memory can be either 4mb, 8mb, 16mb or 32mb, and must be the same size and speed within a bank.

Graphics:

Indy's come with 3 main graphics options - 8bit XL, 24bit XL, and the XZ. The XL cards have decent 2D performance, but everything else is offloaded to the CPU. The XZ has some 3D acceleration (hardware Z buffer, geometry/lighting acceleration). However, it seems to be slower than the XL cards for 2D work.

Ports:

Lots of connectivity comes with the Indy as standard:

  • ISDN BRI port

  • PS/2 keyboard and mouse

  • 10-BaseT or AUI ethernet

  • External fast SCSI

  • S-Video in

  • Digital video in

  • IndyCAM

  • Sound (headphones, microphone, line-in, etc.)

  • Bi-directional printer port

  • 2 Mac-compatible serial ports

Drives:

The Indy has 2 internal 3.5 inch drive bays. These can either take the Floptical drive (SCSI drive that reads/writes normal floppies, and special 21mb 'floptical' disks) or normal hard drives.
If you want a CD or DAT drive, these can be connected via the external SCSI port - it is one SCSI channel though (unlike some other machines).

The internal SCSI connecters are 5mb/s SCSI-1. The cables for the hard drives are standard 50pin SCSI connectors. As SCSI as backwards compatible, any non-HVD drive will work. If the drive doesn't have a 50pin connector, you will need to buy and install a converter.

Several people have reported success using IDE->SCSI converters, and installing IDE drives in their Indys.

More information:

Owner's Guide

The Indy Owner's Guide can be found on Techpubs.

A local copy can be downloaded from here. PDF icon

spacer
Valid XHTML 1.0! Valid CSS!
This site does not represent Silicon Graphics, Inc., in any way.
Silicon Graphics, Inc., does not endorse, approve, or sponsor this site or it's contents in any way.
All trademarks are acknowledged as belonging to their respective owners.
Bottom Left Bottom Right
Questions? Email webmaster@siliconbunny.com
Site ©1999 - 2007 Tom Kranz